| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

* Department of Physiology and Biophysics, and
Department of Microbiology, State University of New York at Stony Brook, New York
Correspondence: Address reprint requests to Suzanne Scarlata, Tel.: 631-444-3071; Fax: 631-444-3432; E-mail: Suzanne.Scarlata{at}sunysb.edu.
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
Besides providing structural integrity to HIV-1 virions, the CA domain in Gag is critical for the incorporation of the host protein cyclophilin A (CypA) into the virus. CypA is a cis-trans prolyl isomerase and in some types of cells, HIV-1 requires CypA for full infectivity, but other closely related viruses, such as SIV, do not (Braaten et al., 1996
). CypA binds to a site in the CA domain, and interestingly, the requirement for cyclophilin can be transferred to other viruses by inserting the CypA-binding site into their CA domains (Bukovsky et al., 1997
). The function of CypA in the HIV-1 life cycle is unclear. It has been suggested that CypA serves as a point of first contact between the virion and T cells that possess cyclophilin receptors on their membrane (Sherry et al., 1998
; Saphire et al., 1999
). However, other studies suggest a role for cyclophilin in post-entry events (Steinkasserer et al., 1995
; Braaten et al., 1996
; Ackerson et al., 1998
). Under some conditions, CypA has been shown to protect HIV-1 from dominant host restriction factors that block infection by targeting incoming viral CA. In other cases CypA appears to be essential for host restriction (Towers et al., 2003
). CypA also appears to be necessary for the functional expression of viral protein R (Vpr) (Zander et al., 2003
). Vpr participates in nuclear localization of the viral preintegration complex and induces G2 cell-cycle arrest in infected, proliferating-T cells (Bukinsky and Adzhubei, 1999
; Henklein et al., 2000
). Also, since CypA is a cis-trans prolyl isomerase, it may affect viral assembly/dissembly through conformation changes that perturb diminish strong CA-CA interactions.
CypA binds to residues 8792 in the HIV-1 CA domain of Gag (i.e., HAGPIA). The CA protein consists of two distinct predominantly
-helical domains linked by a short, unstructured region (Berthet-Colominas et al., 1999
). The N-terminal domain, which is connected to the MA protein in the context of Gag, contains the CypA-binding site (Franke et al., 1994
; Liang et al., 2003
). The C-terminal domain, which is connected to the NC domain and p6 region in the context of Gag, plays an essential role in CA-CA interactions (Colgan et al., 1996
; Kattendbeck et al., 1997
; Lanman et al., 2002
). Previous studies have shown that the binding of CypA to this site alters the structure in distal regions of the protein (Bosco et al., 2002
), and we found that binding of CypA to the N-terminus of a immature form of capsid resulted in pronounced changes in the environment of a fluorescent probe covalently linked to one of the two Cys residues in the C-terminal domain (BonHomme et al., 2003
).
In this study, we have used the changes in fluorescence of probes covalently attached to one of the two CA Cys residues as a read-out of the ability of CypA to modulate conformational changes in aminohexahistidine-tagged CA (His6-CA), which should mimic the immature form of the protein. To better understand the mechanism underlying the changes induced by CypA-binding, we mutated each of the Cys residues into Ala or Ser and studied the behavior of these mutants. The CA Cys residues lie close to each other, but do not form a disulfide linkage, as indicated by their accessibility to Cys-interactive probes (Colgan et al., 1996
; McDermott et al., 1996
). Single Cys mutants of capsid have been previously studied. Cellular studies have shown that mutation of Cys-198 interferes with viral particle disassembly, whereas mutation of Cys-218 blocks virus assembly (McDermott et al., 1996
). Our studies show that CypA-binding induces conformational changes in the C-terminal domain of His6-CA oligomers which were mediated through Cys-198. CypA-binding may thus facilitate the transition of the virus to a mature, disassembly-competent form.
| MATERIALS AND METHODS |
|---|
|
|
|---|
|
Glutathione S-transferase-fused CypA was expressed in Escherichia coli-strain c600 and purified by gravity chromatography using Glutathione Sepharose 4B resin (Amersham Biosciences, Piscataway, NJ). The glutathione S-transferase moiety was cleaved using thrombin. CypA was found to be >95% pure by 15%-sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Coomassie staining. CypA was dialyzed into 50 mM Tris pH 8, 30 mM NaCl and 0.5 mM DTT. After dialysis, sodium azide (0.004%) was added to CypA and the protein was stored at 4°C.
Labeling with acrylodan
The Cys residues of His6-CA were modified using the thiol-reactive probe acrylodan (Molecular Probes). To avoid protein aggregation during the labeling procedure, His6-CA (0.13 µmoles) was immobilized on Ni-NTA agarose (500 µL, Qiagen) after dilution (10x) of the protein so that DTT, present in the storage buffer, would not reduce the nickel ions. The column was then washed with three-column volumes of 100 mM NaH2PO4 pH 7. Agarose-bound His6-CA (0.13 µmoles) was incubated with acrylodan (1.3 µmoles) in 100 mM NaH2PO4, pH 7, for 2 h at room temperature in a rotary shaker. The reaction was stopped by the addition of ß-mercaptoethanol (13 µmoles). Agarose-bound His6-CA was washed three times with 10-column volumes of 100 mM NaH2PO4 pH 7 (5 mL), to remove excess acrylodan. Acrylodan-labeled His6-CA was eluted with two-column volumes of 500 mM imidazole in 50 mM NaH2PO4, pH 7. Unreacted acrylodan was removed using size exclusion chromatography (Bio-Gel P-2 Gel, Bio-Rad Laboratories, Hercules, CA) and 50 mM NaH2PO4, pH 7 as the eluant. Typically 40% to 80% of wild-type CA molecules were labeled with two acrylodan molecules. Protein concentration was determined using Bio-Rad Protein Assay Dye Reagent Concentrate (Bio-Rad Laboratories). The extent of labeling was estimated by absorption.
CypA was labeled with acrylodan by first dialyzing, three times for 20 min against 1000 volumes of 100 mM NaH2PO4 pH 7, to remove DTT. After, a 10-fold molar excess of acrylodan was added to CypA and the mixture was incubated for 2 h at room temperature in a rotary shaker. The rest of the procedure was the same as that followed for CA labeling.
Measurement of apparent-interaction constants and dissociation constants using fluorescence spectroscopy
All fluorescent measurements were made on an ISS PC1 photon counting spectrofluorometer (ISS, Champaign, IL) using quartz microcuvettes with a path length of 3 mm. An excitation wavelength was determined for each sample and was typically close to 368 nm. The emission wavelength was scanned from 400 nm to 600 nm. To determine apparent-interaction constants (KI, APP), acrylodan-labeled His6-CA (
2 µM) was titrated with CypA (up to 3 µM) in 100 mM NaH2PO4 at either pH 8, 7, or 6. The control sample was acrylodan-labeled His6-CA (
2 µM) titrated with an equivalent volume of buffer. To determine dissociation constants (KD) acrylodan-labeled CypA (0.020 µM or 0.2 µM) was titrated with His6-capsid (0.6 µM3.8 µM) in 100 mM NaH2PO4 pH 8, 7, or 6. Control studies substituted buffer for His6-capsid. For studies that used cyclosporin A (CsA), CypA was preincubated with a fivefold molar excess of CsA for 1 h. Binding constants were calculated using either the running integral or the median of the emission spectra (see Data analysis).
Rate of core formation
To form cores, His6-CA (113 µM) was dialyzed three times against 1000 volumes of 50 mM Tris pH 8 and 1 M NaCl at 4°C for 1 h. Studies were performed by placing His6-CA in a 10 mm-quartz cuvette with constant stirring and the temperature set to 37°C. The rate of core formation was monitored at an angle of 90° to the incident light in an ISS spectrofluorometer with the excitation and emission wavelengths set at 350 nm. The rate of core formation was found by fitting the change in scattering intensity with time to a first order rate constant (see Data analysis).
Hydrostatic-pressure dissociation of cores as monitored by single-angle light scatter
Cores made of His6-CA protein (113 µM) were loaded into a silanized quartz cuvette topped with a collapsible-polyethylene lid for the transmission of pressure. The cuvette was placed into a high-pressure cell made of heat-treated Vascomax, which was connected to a pressure generator (High Pressure Equipment, Erie, PA) through a high-pressure line also made of Vascomax. Pressure was generated through the compression of 100% ethanol. The windows of the cell are made of sapphire to allow for light measurement. The pressure cell was placed into the sample chamber of the fluorometer. Single-angle light-scattering measurements were collected at an angle 90° of the incident light (350 nm). Pressure was increased in steps of 250 bars allowing 5 min for equilibrium to be reached.
Data analysis
To obtain apparent-interaction constants (KI, APP) and dissociation constants (KD), spectral parameters, such as the running integral or the median value of the emission peak, were calculated for experimental and control spectra. If the running integral was chosen, then the parameters were corrected for dilution. If the median value was chosen, then the wavelengths were converted to a unit of energy (e.g., wavenumbers). The control parameters were subtracted from the experimental parameters and the control-corrected parameters were normalized. The normalized-spectral parameters represent the degree of association.
We have viewed the interaction between His6-CA and CypA either directly by labeling CypA with a probe close to the capsid interaction site and obtaining an apparent dissociation constant, or indirectly by measuring the change of a fluorescence probe in the C-terminal domain of capsid when CypA binds to the N-terminal domain to obtain and apparent interaction constant.
We note that the fluorescence spectrum of the fluorophore used in these studies, acrylodan, was constant within error from pH 6 to8 as measured using a ß-mercaptoethanol adduct.
Determination of KD, the dissociation constants
To obtain dissociation constants (KD values) for His6-CA-CypA-binding, CypA was labeled with acrylodan. CypA has four cysteines distributed throughout its structure. Cysteines 52, 62, 115, and 161 are located 14.8, 10.6, 7.1, and 19.6 Å, respectively, away from the CypA-binding site (Pro-90) in CA the protein based on the structure of Berthet-Colominas and co-workers (Protein Data Bank (PDB) 1E6J (Berthet-Colominas et al., 1999
)). These distances were obtained using WebLab ViewerPro 3.7 (Accelrys, San Diego, CA). Use of acrylodan-labeled CypA allows monitoring of CA-CypA-binding directly as opposed to monitoring CypA-induced changes in the CA C-terminal domain. In this case, a bimolecular-dissociation model can be assumed because acrylodan-labeled CypA titrated with capsid behaves with 1:1 stoichiometry.
The data are presented as the change in fluorescence intensity of acrylodan-CypA as a function of total capsid concentration. We assume that all of the proteins are associated when the titration curve reaches saturation. From the change in intensity, we calculate the degree of protein association at each point along the titration curve (see BonHomme et al., 2003
).
The reported Kd values were determined using
![]() |
Determination of KI, APP, the apparent-interaction constant
To calculate apparent-interaction constants (KI, APP), acrylodan-labeled CypA concentrations at each titration point and the degree of association were fit to a following hyperbolic equation using SigmaPlot 2001 version 7.101. The reported apparent-interaction constant (KI, APP) and error represent the mean and mean ± SE of the individual experiments.
The CA protein exists as a tetramer or higher oligomer at pH 8 and pH 7, and as a monomer-dimer at pH 6 (Ehrlich et al., 2001
). Distance measurements of the crystal structure using WebLabViewerPro 3.7 (Accelrys) indicate that the distance (63.5 Å) between the CypA-binding site and acrylodan does not allow for direct monitoring of binding (PDB 1E6J; Berthet-Colominas et al., 1999
). For these reasons, any changes detected using this experimental design, resulting from a binding interaction, will most likely represent a change in conformation, a change in oligomerization state or a combination of these events. The exact nature of the change being monitored is unclear. However, because the change follows a rectangular hyperbolic, then this interaction may be thought to be specific to one site and the constant of the hyperbolic equation is defined as the apparent-interaction constant (KI, APP). The tiration curves present the change in fluorescence as a function of the amount of total protein added.
Determination of the rate constants
To obtain initial rates of core formation, the exponential-rise portion of the curves were fit to the following equation using SigmaPlot 2001 version 7.101,
![]() |
| RESULTS |
|---|
|
|
|---|
In initial studies, we used previously described His6-CA mutants that contained deletions throughout the protein (Dietrich et al., 2001
) to map the antigenic site of several monoclonal antibodies. One of these, NEN-NEA 9306, recognized an antigenic site within the CypA interaction domain in the N-terminal domain of His6-CA. In Fig. 1 a, we show that NEN-NEA 9306 recognized WT His6-CA (lane 2) and all of the His6-CA deletion mutants (lanes 1, 3, 5, 6, and 7) except the mutant lacking residues 7598, which includes H87AGPIA92 (lane 4). Interestingly, we found that addition of NEN-NEA 9306 to acrylodan-labeled His6-CA could confer changes in the C-terminal domain as visualized by changes in the fluorescence of the probe acrylodan covalently attached to one or both of the Cys residues located in the C-terminal domain (Fig. 1 b).
The effect of binding NEN-NEA 9306 was compared to that of a second antibody, anti-CASI (International Enzymes), which was raised against residues 151160 in the CA C-terminal domain. In Fig. 1 a, we show that this antibody recognized WT His6-CA (lane 1) and all of the His6-CA deletion mutants (lanes 25 and 7) except the mutant lacking residues 152176 (lane 6). In contrast to the results obtained with NEN-NEA 9306, no change was detected using the antibody against residues 151160 (Fig. 1 b). These results suggest that perturbation of CA through interaction with the region encompassing the CypA-binding site induces conformational changes in the CA C-terminal domain.
To further characterize the ability of CypA to bind and transduce conformational changes in capsid, we compared the binding of acrylodan-labeled CypA to unlabeled His6-CA. Since this association is visualized directly by changes in acrylodan emission on the labeled CypA due to changes in the local dielectric environment as unlabeled His6-CA associates, we can follow the changes in fluorescence to obtain an apparent dissociation constant (KD). Alternately, we can follow the association indirectly by changes in the fluorescence of acrylodan-labeled His6-CA that result from conformation changes brought about by the binding to unlabeled CypA to a distal site on capsid to obtain an apparent interaction constant (KI, APP)] (see Methods).
In Fig. 2, we present results for KD and KI, APP evaluated at pH 8, 7, and 6. We note that the data in Fig. 2, ac, have previously been reported (BonHomme et al., 2003
). Although the data are identical to these previous results, they have been analyzed using a hyperbolic fit rather than a bimolecular association, which, as discussed in Methods, is inappropriate for this association. We present these data again to allow for easy comparison between the wild-type proteins and the mutants discussed below.
|
The fact that an antibody targeted to the CypA-binding site induced a conformational change in the CA C-terminal domain (Fig. 1) suggests that the CypA-induced change is the result of CypA-binding and not its cis-trans prolyl isomerization activity. To gain insight into the underlying basis of the change, we repeated the His6-CA association studies using an acrylodan CypA mutant, H54Q, whose prolyl isomerase activity is only 15% of wild-type (Zydowsky et al., 1992
). In Fig. 3, we list the apparent-dissociation constants taken from the midpoint of the binding curve (KD, APP) at pH 8, 7, and 6. Interestingly, these data could not be fit to a bimolecular-dissociation constant using the total CypA H54Q concentration (200 nM). However, if we assume that only the active population of CypA H54Q (15% of the total concentration, or
30 nM) participates in binding, we can calculate a dissociation constant that is within error to that of the wild-type.
|
CypA-binding affects the environment of capsid Cys-198
To determine which Cys residue of CA is most affected by CypA-binding, we constructed single Cys mutants of His6-CA. Since binding between His6-CA and CypA at pH 7 is strong and produces a conformational change in the C-terminal domain of CA protein, subsequent studies were performed at this pH. Protein-protein association studies were again measured by changes in acrylodan-CypA fluorescence as unlabeled His6-CA was added. As shown in Fig. 4, acrylodan-CypA binds to His6-CA C198A and C198S with similar affinities and those affinities were close to that of wild-type (37.7 ± 1.9 nM and 33.3 ± 3.3 nM, respectively, Fig. 4, D and E) as compared to 40.1 ± 13 nM (Fig. 2 E). Interestingly, however, CypA was not able to induce a change in the C-terminal domain of the Cys-198 His6-CA mutants (Fig. 4, A and B).
|
Mutants of His6-CA form cores more rapidly than wild-type
We monitored the rate of core formation of wild-type and mutants His6-CA proteins using single angle light scattering at 350 nm (see BonHomme et al., 2003
). The kinetic profiles of the mutants were similar but differed significantly from wild-type (Fig. 5). His6-CA wild-type exhibited a relatively slow and continuous exponential rise (Fig. 5 D), whereas the His6-CA mutants displayed a much more rapid-exponential rise followed by a rapid loss of intensity (Fig. 5, AC) (see Discussion).
|
The morphology of His6-CA C198A and C218A mutants differ from wild-type
The large difference in the core formation rates between wild-type His6-CA and the Cys mutants prompted us to determine whether these proteins formed morphologically distinct complexes. The morphology of the resulting cores was investigated by electron microscopy (Fig. 6). His6-CA C198A (Fig. 6 A) forms spherical structures similar to the wild-type protein (BonHomme et al., 2003
), although the cores formed by the mutant protein were much smaller in size. In contrast, His6-CA C218A formed mainly tubular structures in addition to small spherical structures (Fig. 6 B). We note that mature (i.e., untagged) CA has been shown to form tubular structures that are larger in size than the ones observed here (Gross et al., 1998
; Ehrlich et al., 2001
)
|
Using single-angle light scattering, we monitored the dissociation of the CA proteins in real time as a function of hydrostatic pressure. We have previously shown that the application of hydrostatic pressure on His6-CA results in a concentration-dependent reduction in light scattering that is directly related to dissociation of virion cores (BonHomme et al., 2003
). Here, we find that wild-type His6-CA and C218A at 113 µM showed significant dissociation in the first 1750 bars (42 ± 5% and 38 ± 2%, respectively, Fig. 7 A). Release of pressure allowed the values for the light scattering to return to within 10% of their original value. In contrast, the complexes of C198A His6-CA formed at the same concentration using were relatively insensitive to pressure dissociation; only 9 ± 2% of His6-capsid C198A dissociated in the same 1750 bar range. This result correlates well with previous studies indicating that viruses containing Cys-198 mutants are impaired in disassembly (McDermott et al., 1996
).
|
| DISCUSSION |
|---|
|
|
|---|
An important role of the CA protein in the HIV-1 life cycle is to promote multimerization during assembly. We have previously found that oligomerization of CA in vitro can be induced by the combination of pH values above 6 and high ionic strength (Ehrlich et al., 2001
). Additionally, the N-terminal domain of CA incorporates CypA into virions (Franke et al., 1994
; Gamble et al., 1996
). We have found that binding of CypA causes a change in the environment of an acrylodan probe covalently linked to the one of the two Cys in the C-terminal domain. Monitoring the association between CypA and His6-CA, either by viewing changes in a probe attached to CA or a probe attached to CypA, shows that binding is weaker to monomeric His6-CA (i.e., at pH 6) and that this binding does not transmit changes to the CA C-terminal domain. However, the binding of CypA to oligomerized His6-CA (i.e., > pH 6) allows for this change. Together with the observation that changes in the C-terminal domain on His6-CA can be induced by the binding of a monoclonal antibody to the N-terminal domain CypA-binding site, makes it unlikely that the effect of CypA on HIV-1 Gag is due to its cis-trans prolyl isomerase activity.
Binding of CypA to CA, and catalysis of Pro-90 isomerization, has been previously characterized using a number of biophysical methods including fluorescence, NMR, crystallographic, and theoretical (Endrich et al., 1996
; Gamble et al., 1996
; Bosco et al., 2002
; BonHomme et al., 2003
; Agarwal, 2004
; Bosco and Kern, 2004
). Taken together, these studies show that binding of CypA to the single site encompassing Pro-90 promotes cis/trans isomerization. However, our data suggests that Pro-90 isomerization may not play a role in the conformational changes in the C-terminal domain observed here since binding of antibody to this site also confers these changes (Fig. 1). It is possible, but unlikely, that the antibody binding accelerates prolyl isomerization. A comprehensive NMR study by Bosco and Kern (2004)
shows that CypA binds to both mature and immature forms of CA and that binding and catalysis is not linked to maturational processing. Interestingly, these authors did not observe structural changes in the C-terminal domain upon CypA-binding, but noted that CypA may alter the structure of this region when CA is in an aggregated form. This idea is well supported by these studies showing that no changes in the C-terminal domain could be detected when CypA binds to CA at pH 6 where CA should be monomeric (Fig. 2).
We could only fit the CypA H54Q-CA titration curves if we assume that a fraction (i.e., 15%) of the CypA mutant is capable of binding, and the affinity turns out to be similar to wild-type. We could not fit the data by simply assuming that H54Q binds to CA with a weaker affinity. This result suggests that although the CypA H54Q mutant has mainly lost the ability to induce changes in the CA C-terminal domain, a small subpopulation of the mutant may retain the ability to bind immature and mature forms of CA. To understand how the CypA H54Q mutant can bind to capsid as tight or tighter than wild-type and still have a low level of isomerase activity, we propose reaction scheme based on previous work (Howard et al., 2003
). Here, the peptide backbone loses double character due to formation of a hydrogen bond between the nitrogen (
1) on CypA's Arg55 and the nitrogen (
) on the CA Pro-90 residue (Howard et al., 2003
). In the ground state, the distance between these groups ranges from 3.3 to 4.4 Å (Howard et al., 2003
). Formation of this hydrogen bond stabilizes a pyramidal sp3-hybridization state for capsid's Pro-90 resulting in localized single-bond character. During the transition state, increasing single-bond character allows for both the lengthening and ultimately the free rotation of the bond between the CA Pro-90 nitrogen (
) and the neighboring carboxyl carbon. In addition, the hydrogen bond between the nitrogen (
1) on CypA's Arg-55 and the nitrogen (
) on CA Pro-90 is expected to shorten. It has been demonstrated that the two residues immediately N-terminal of Pro-90 in CA move from the cis to the trans position as a result of CypA catalysis, whereas residues C-terminal of Pro-90 do not move (Howard et al., 2003
). Within the CypA hydrophobic-binding pocket, CA His-87 and CypA His-54 face each other (PDB 1AK4; Gamble et al., 1996
) and possible charge repulsion between the histidine residues may hold the capsid residues N-terminal of Pro-90 far enough away to allow rotation of the nitrogen-carboxyl bond during catalysis. Mutation of CypA His-54 to the uncharged Gln would reduce the charge repulsion and result in steric hinderance and not allow the cis to trans rotation. This is supported by the difference in the pH trends of the measured dissociation constants between wild-type and mutant CypA.
We observed large differences in the rate of core formation between wild-type and single Cys capsid proteins. Although the wild-type protein shows a steady rise in single angle light scattering (Fig. 4) as expected, due to an increase in the number of cores formed, this rise was much more rapid for the mutants, and followed by a decrease. We note that under the conditions of our studies, the increase in scattering is due to an increase in the size and number of particles that are smaller than the wavelength used, whereas the decrease results from the particles becoming much larger than the incident wavelength. It is noteworthy that, unlike wild-type, the mutant assemblages become visible after 1 h (data not shown). The significance of these differences is unknown. Interestingly, even though His6-capsid Cys-198 aggregated rapidly to small spherical cores, these were not readily dissociated by pressure, indicating that the void volume between the subunits in these cores was lower than wild-type. Thus, the subunit packing in the cores made from His6-CA Cys-198 is tighter than wild-type giving a more extensive protein contact region. In contrast, His6-CA Cys-218A, which also rapidly aggregated, dissociated with a similar pressure profile as wild-type. Since our studies indicate that mutation of Cys-198 prevents the conformational changes induced by CypA, our results suggest that the conformational changes in CA induced by CypA-binding may facilitate disassembly by stabilizing a particular structural intermediate.
Almost identical binding and kinetic behavior is seen for both the C198A and the C198S mutants. The similar behavior of these two mutants suggests that differences in hydrogen bonding do not play a role in the Cys-198 function assayed in these experiments, and they alternately suggest that the differences lie in the replacement of sulfur from oxygen. We can speculate the basis for this idea. In viewing the crystal structure of the local area surrounding Cys-198 (PDB IE6J; Berthet-Colominas et al., 1999
) we find that a likely candidate is the interaction of its sulfhydryl group with the oxygen of Gly-220 through rotation of the Cys-198 side chain, and it is noteworthy that Gly-220 plays a role in Gag assembly (Liang et al., 2003
). In contrast to the Cys-198 mutants, the Cys-218 mutant has a greatly reduced affinity for CypA. However, this mutant allows for transmission of the signal induced by CypA-binding. This behavior correlates well with the observation that Cys-218 forms particles that resemble the mature (tubular) form of capsid, and suggests that transmission of the signal facilitates formation of weaker, disassembly-competent particles (Ehrlich et al., 2001
).
In summary, the results of this study show that the CA C-terminal domain is structurally altered upon occupation of CypA-binding site in the N-terminus. Further structural studies are required to understand the nature of this conformational alteration and to define the residues that mediate this change.
| ACKNOWLEDGEMENTS |
|---|
|
|
|---|
This work was supported by National Institutes of Health grants GM58271 (S.S. and C.C.) and GM48294 (C.C.) M.B. was supported in part by the W. Burghardt Turner Fellowship program.
Submitted on September 20, 2004; accepted for publication December 28, 2004.
| REFERENCES |
|---|
|
|
|---|
Agarwal, P. K. 2004. Cis/trans isomerization of HIV-1 capsid protein catalyzed by cyclophilin A: insights from computational and theoretical studies. Proteins. 56:449463.[CrossRef][Medline]
Berthet-Colominas, C., S. Monaco, A. Novelli, G. Sibai, F. Mallet, and S. Cusack. 1999. Head-to-tail dimers and interdomain flexibility revealed by the crystal structure of HIV-1 capsid protein (p24) complexed with a monoclonal antibody Fab. EMBO J. 18:11241136.[CrossRef][Medline]
BonHomme, M., S. Wong, C. Carter, and S. Scarlata. 2003. The pH dependence of HIV-1 capsid assembly and its interaction with cyclophilin A. Biophys. Chem. 105:6777.[CrossRef][Medline]
Bosco, D., E. Eisenmesser, S. Pochapsky, W. Sundquist, and D. Kern. 2002. Catalysis of cis/trans isomerization in native HIV-1 capsid by human cyclophilin A. Proc. Natl. Acad. Sci. USA. 99:52475252.
Bosco, D., and D. Kern. 2004. Catalysis and binding of cyclophilin A with different HIV-1 capsid constructs. Biochemistry. 43:61106119.[CrossRef][Medline]
Braaten, D., E. Franke, and J. Luban. 1996. Cyclophilin A is required for an early step in the life cycle of human immunodeficiency virus type 1 before the initiation of reverse transcription. J. Virol. 70:35513560.[Abstract]
Bukinsky, M., and A. Adzhubei. 1999. Viral protein R of HIV-1. Rev. Med. Virol. 8:3949.
Bukovsky, A. A., A. Weimann, M. A. Accola, and H. G. Gottlinger. 1997. Transfer of the HIV-1 cyclophilin-binding site to simian immunodeficiency virus from Macaca mulatta can confer both cyclosporin sensitivity and cyclosporin dependence. Proc. Natl. Acad. Sci. USA. 94:1094310948.
Campbell, S., and A. Rein. 1999. In vitro assembly properties of human immunodeficiency virus type 1 Gag protein lacking the p6 domain. J. Virol. 73:22702278.
Colgan, J., H. E. Yuan, E. K. Franke, and J. Luban. 1996. Binding of the human immunodeficiency virus type 1 Gag polyprotein to cyclophilin A is mediated by the central region of capsid and requires Gag dimerization. J. Virol. 70:42994310.[Abstract]
Dietrich, L., L. Ehrlich, T. LaGrassa, D. Ebbets-Reed, and C. Carter. 2001. Structural consequences of cyclophilin A binding on maturational refolding in human immunodfeiciency virus type 1 capsid protein. J. Virol. 75:47214733.
Dorfman, T., A. Weimann, A. Borsetti, C. T. Walsh, and H. G. Gottlinger. 1997. Active-site residues of cyclophilin A are crucial for its incorporation into human immunodeficiency virus type 1 virions. J. Virol. 71:71107113.[Abstract]
Ehrlich, L. S., T. Liu, S. Scarlata, B. Chu, and C. A. Carter. 2001. HIV-1 capsid protein forms spherical (immature-like) and tubular (mature-like) particles in vitro: structure switching by pH-induced conformational changes. Biophys. J. 81:586594.
Endrich, M., P. Gehrig, and H. Gehring. 1996. Maturation-induced conformational changes of HIV-1 capsid protein and identification of two high affinity sites for cyclophilin in the C-terminal domain. J. Biol. Chem. 274:53265332.[CrossRef]
Franke, E. K., H. E. Yuan, and J. Luban. 1994. Specific incorporation of cyclophilin A into HIV-1 virions. Nature. 372:359362.[CrossRef][Medline]
Gamble, T. R., F. F. Vajdos, S. Yoo, D. K. Worthylake, M. Houseweart, W. I. Sundquist, and C. P. Hill. 1996. Crystal structure of human cyclophilin A bound to the amino-terminal domain of HIV-1 capsid. Cell. 87:12851294.[CrossRef][Medline]
Gitti, R., B. Lee, J. Walker, M. K. Summers, S. Yoo, and W. Sundquist. 1996. Structure of the N-terminal core domain of the HIV-1 capsid protein. Science. 273:231235.[Abstract]
Gross, I., H. Hohenberg, C. Huckhagel, and H.-G. Krausslich. 1998. N-terminal extension of human immunodeficiency virus capsid protein converts the in vitro assembly phenotype from tubular to spherical particles. J. Virol. 72:47984810.
Henklein, P., K. Bruns, M. P. Sherman, U. Tessmer, K. Licha, J. Kopp, C. M. de Noronha, W. C. Greene, V. Wray, and U. Schubert. 2000. Functional and structural characterization of synthetic HIV-1 vpr that transduces cells, localizes to the nucleus, and induces G2 cell cycle arrest. J. Biol. Chem. 275:3201632026.
Heremans, K. A. H. 1992. High pressure effects upon proteins and other biomolecules. Annu. Rev. Biophys. Bioeng. 11:121.[CrossRef][Medline]
Howard, B. R., F. F. Vajdos, S. Li, W. I. Sundquist, and C. P. Hill. 2003. Structural insights into the catalytic mechanism of cyclophilin A. Nat. Struct. Biol. 475481.
Kattendbeck, B., A. von Poblotzki, A. Rohrhofer, H. Wolf, and S. Modrow. 1997. Inhibition of human immunodeficiency virus type 1 particle formation by alteration of defined amino acids within the C-terminus of capsid. J. Gener. Virol. 78:24892496.[Abstract]
Lanman, J., J. Sexton, M. Sakalian, and P. E. Prevelige Jr. 2002. Kinetic analysis of the role of intersubunit interactions in human immunodeficiency virus type 1 capsid protein assembly in vitro. J. Virol. 76:69006908.
Liang, C., J. Hu, J. B. Whitney, L. Kleiman, and M. A. Wainberg. 2003. A structurally disordered region at the C terminus of capsid plays essential roles in multimerization and membrane binding of the Gag protein of human immunodeficiency virus type 1. J. Virol. 77:17721783.
Mammano, F., A. Ohagen, S. Hoglund, and H. Gottlinger. 1994. Role of the major homology region of human immunodeficiency virus type 1 in virion morphogenesis. J. Virol. 68:49274936.
McDermott, G., L. Farrell, R. Ross, and E. Barklise. 1996. Structural analysis of human immunodeficiency virus type 1 Gag protein interactions using cysteine-specific reagents. J. Virol. 70:51065114.
Recin, A. S., S. R. Paik, R. D. Berkowitz, J. Luban, I. Lowy, and S. P. Goff. 1995. Linker insertion mutation in the human immunodeficeincy virus type 1 gag gene: effects on virion particle assembly, release and infectivity. J. Virol. 69:642650.[Abstract]
Saphire, A., M. Bobardt, and P. Gallay. 1999. Host cyclophilin A mediates HIV-1 attachment to target cells via heparans. EMBO J. 18:67716785.[CrossRef][Medline]
Scarlata, S., and C. Carter. 2003. Role of HIV-1 gag domains in viral assembly. Biochim. Biophys. Acta. 1614:6272.[Medline]
Sherry, B., G. Zybarth, M. Alfano, L. Dubrobsky, R. Mitchell, D. Rich, P. Ulrich, R. Bucala, A. Cerami, and M. Bukrinsky. 1998. Role of cyclophilin A in the uptake of HIV-1 by macrophages and T lymphocytes. Proc. Natl. Acad. Sci. USA. 95:17581763.
Steinkasserer, A., R. Harrison, A. Billich, F. Hammerschmid, G. Werner, B. Wolff, P. Peichl, G. Palfi, W. Schnitzel, E. Mlynar, and others. 1995. Mode of action of SDZ NIM 811, a nonimmunosuppressive cyclosporin A analog with activity against human immunodeficiency virus type 1 (HIV-1): interference with early and late events in HIV-1 replication. J. Virol. 69:814824.[Abstract]
Towers, G. J., T. Hatziioannou, S. Cowan, S. P. Goff, J. Luban, and P. D. Bieniasz. 2003. Cyclophilin A modulates the sensitivity of HIV-1 to host restriction factors. Nat. Med. 9:11381143.[CrossRef][Medline]
von Poblotzki, A., R. Wagner, M. Niedrig, G. Wanner, H. Wolf, and S. Modrow. 1993. Identification of a region of Pr55gag-polyprotein essential for HIV-1 particle formation. Virology. 193:981985.[CrossRef][Medline]
von Schwedler, U., T. Stemmler, V. Klishko, S. Li, K. Albertine, D. Davis, and W. Sundquist. 1998. Proteolytic refolding of the HIV-1 capsid protein amino -terminus facilitates viral core assembly. EMBO J. 17:15551568.[CrossRef][Medline]
Zander, K., M. P. Sherman, U. Tessmer, K. Bruns, V. Wray, A. T. Prechtel, E. Schubert, P. Henklein, J. Luban, J. Neidleman, W. C. Greene, and U. Schubert. 2003. Cyclophilin A interacts with HIV-1 Vpr and is required for its functional expression. J. Biol. Chem. 278:4320243213.
Zydowsky, L., F. Etzkorn, H. Y. Change, S. B. Ferguson, L. A. Stolz, S. I. Ho, and C. T. Walsh. 1992. Active site mutants of human cyclophilin A separate peptidyl-prolyl isomerase activity from cyclosporin A binding and calcineurin inhibition. Protein Sci. 1:10921099.[Abstract]
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |